• Contains special cements, synthetic additives, mineral fillers, and water-repellent agents.
• Resistant to water and frost.
• Unaffected by temperature fluctuations.
• Extended working time.

It is used for gluing and fixing roof ridge boards.

A. Preparation

The application surface should be cleaned from substances preventing adhesion such as dust, paint, oil. The surface should be wetted with water to keep it moist during application.

B. Application

Slowly pour 25 kg of Barkim Ridge Mortar into 5-6 liters of clean water and mix with a low speed mixer until there are no lumps and air bubbles. Let the mortar rest for 5 minutes. Spread the ridge mortar over the application surface. Apply it to the junction points of the ridge so that there are no gaps and glue the recesses of the ridge boards to each other. It is finalized with a damp sponge after an average of 1 hour. In hot weather, surfaces exposed to direct sunlight should be cured with water for 24 hours.