• Does not crack.
• Adheres easily to the surface.
• The strength at each point is the same.

• It is applied on brick, aerated concrete, reinforced concrete, briquette and similar surfaces.

Preparation

The surface to be applied should be cleaned of factors that will prevent adhesion such as dust, paint and mold oil and the floor should be wetted. Slowly pour 25 kg of ready-made rough plaster into 6-7 liters of clean water and mix with a low speed mixer until there are no lumps and air bubbles.

Application

Maximum 2.5 cm should be used in a single coat. The second coat should be applied one day later if desired. Minimum 1 cm thickness should be used. It is useful to prepare enough material to be used during application. Rough plastering is done with the help of a trowel. It is inconvenient to use lime due to the chemicals contained in the material itself.