• Contains special cements, synthetic additives, mineral fillers, water repellent agents
• Resistant to water and frost.
• Not affected by temperature differences
• Processing time is long
• Does not sag
• Asbestos free
• Easy to adhere to the surface

It is a ready-mixed mortar used for bonding tiles, ceramics, tiles, natural and artificial stones to plaster, screed and concrete on horizontal and vertical floors, indoors and outdoors.

A. Preparation

The surface must be clean, completely free of dust, dirt, oil, and other adhesion-preventing factors, and cracks must be filled.

B. Application

25 kg Protek tile adhesive should be slowly poured into 6-7 liters of clean water and mixed with a low speed mixer until there are no lumps and air bubbles and the mortar should be rested for 5 minutes. The prepared mortar is applied to the surface, combed and ceramic adhesion is made. Application thickness should be between 3-8 mm. Joint filling should begin after 24 hours.

25 kg kraft bag