• Contains special cements, synthetic additives, mineral fillers, and water-repellent agents.
• Resistant to water and frost.
• Unaffected by temperature fluctuations.
• Extended working time.
• Non-sagging.
• Asbestos-free.
• Adheres easily to the surface.

• In all locations,
• On horizontal and vertical surfaces
• To plaster, screed and concrete surfaces,
• Glazed porcelain and granite ceramics,
• It is used for bonding large natural and artificial stones.

Preparation

The surface must be clean, completely free of dust, dirt, oil, and other adhesion-preventing factors, and cracks must be filled.

Application

25kg of Promax C2 TE S1 Glazed Granite Ceramic Adhesive is slowly poured into 6.5-7 liters of clean water and mixed with a low-speed mixer. The mixture should be stirred until there are no lumps or air bubbles, and then the mixture should be left to rest for 5 minutes. The prepared mortar is applied to the surface, combed, and then the ceramic tiles are glued on. The application thickness should be between 3-8 mm. Joint filling should begin after 24 hours.