• Contains special cements, synthetic additives, mineral fillers, and water-repellent agents.
• Resistant to water and frost.
• Unaffected by temperature fluctuations.
• Extended working time.
• Non-sagging.
• Asbestos-free.
• Adheres easily to the surface.

• For indoor and outdoor use,
• In swimming pools, commercial and industrial floors, and surfaces exposed to heavy pedestrian traffic,
• Horizontal and vertical surfaces, tiles,
• Ceramics,
• Laminates,
• Marble,
• Granite and glass mosaics: This is a ready-to-use mortar for filling 2-8 mm joint gaps that are resistant to shrinkage and vibration caused by temperature variations.

Preparation

Before starting the application, the surface and the joint gaps of the tiles must be cleaned of agents that prevent adhesion, such as dust, oil, and paraffin.

Application

20 kg of Barkim Barkosil Grout should be slowly poured into 6.5-7 liters of clean water and mixed using a low-speed mixer until no lumps or air bubbles remain. The mortar should rest for 5 minutes, then be mixed for another 30 seconds before starting the application. The application thickness should be between 3 mm and 8 mm.