• Contains special cements, synthetic additives, mineral fillers, and water-repellent agents.
• Resistant to water and frost.
• Unaffected by temperature fluctuations.
• Extended working time.
• Non-sagging.
• Asbestos-free.
• Adheres easily to the surface.

• It is used for filling cracks and gaps in aerated concrete and bricklaying.

Preparation

The surface must be clean, free from dust, dirt, oil and other factors preventing adhesion and leveled with the first row of cement mortar.

Application

25 kg of aerated concrete adhesive should be slowly poured into 6-7 liters of clean water and mixed with a low speed mixer until there are no lumps and air bubbles. After mixing, the mortar should be allowed to rest for 5 minutes. The prepared mortar is applied to the surface, combed and glued. The application thickness should be between 3-8 mm.

In 25 kg kraft bags