• Contains special cements, synthetic additives, mineral fillers, and water-repellent agents.
• Resistant to water and frost.
• Unaffected by temperature fluctuations.
• Extended working time.
• Non-sagging.
• Asbestos-free.
• Adheres easily to the surface.

• In all venues,
• Horizontal and vertical floors
• On surfaces such as plaster, screed, concrete, drywall and gypsum plaster
• Bonding of ceramics, tiles, natural and artificial stones,
• Used for plaster repairs and 2-4 mm surface correction.

Preparation

The surface must be clean, completely free of dust, dirt, oil, and other adhesion-preventing factors, and cracks must be filled.

Application

25 kg Protek 2101 white flex tile adhesive should be slowly poured into 6-7 liters of clean water and mixed with a low speed mixer until there are no lumps and air bubbles. Let the mortar rest for 5 minutes. The prepared mortar is applied to the surface, combed, and then the ceramic tiles are glued on. The application thickness should be between 3-8 mm. Joint filling should begin after 24 hours.

In 25 kg kraft bags