• It is easy to prepare and use.
• It has high adhesive properties.
• It has high elasticity.
• It does not slip in vertical applications.
• It saves time and labor.
• Resistant to water and frost.
• Unaffected by temperature fluctuations.
• Extended working time.

• Indoors and outdoors.
• In vertical and horizontal applications,
• On terraces and balconies,
• In places that are constantly exposed to water, such as swimming pools,
• For the application of cladding materials measuring 40×40 cm and larger,
• In areas with heavy pedestrian and vehicle traffic,
• Used for bonding materials such as granite ceramics, marble, and natural granite.
• In places where the temperature difference is large,
• For applications on gypsum plaster, gypsum panels, aerated concrete and exposed concrete,
• For bonding natural stone, BTB, and glass mosaics,
• In wet areas such as swimming pools, water tanks, baths, bathrooms, etc,
• It is used in wall and floor coverings in underfloor heating systems, heated pools, thermal pools, swimming pools that are not drained in winter, and cold storage facilities.
• Before applying existing ceramic-on-ceramic bonding, the surface must be primed with ASTAR 302.

A. Preparation

Surfaces must be clean, smooth, and sound, free from all types of dust, oil, dirt, rust, mold release agents, detergents, and similar adhesion-inhibiting substances and residues. Surfaces must be level, and weak parts should be removed. Absorbent and glossy surfaces should be primed with a suitable primer. If there are cracks or cavities in the floor or wall to be bonded, they should be repaired with appropriate BARKİMOR repair mortars. Bonding should begin 3-4 days later.

B. Application

25 kg of Promax C2 TE S2 White Granite and Ceramic Adhesive should be slowly poured into 6-6.5 liters of clean, clear water in a clean container and mixed with a low-speed mixer until a homogeneous consistency without lumps is obtained. After the mortar rests for 5 minutes, it should be mixed again for 1 minute before application. The prepared mortar is spread onto the surface with a trowel of appropriate tooth size. The cladding materials (ceramics, tiles, etc.) should be adhered to the troweled mortar within 30 minutes. If this time has passed, the mortar should be scraped off the surface and claddings. New mortar should be prepared and applied. Grouting should begin at least 24 hours later.