• Suitable for indoor and outdoor use.
• It does not shrink or crack.
• Suitable for horizontal and vertical applications.
• Because it does not contain corrosive or toxic substances, it can be used in water tanks.

• In kitchens and bathrooms,
• Water storage tanks, swimming pools,
• On terraces and balconies,
• Foundations
• For vertical and horizontal applications, both indoors and outdoors.

Surface Preparation:

The application surface should be cleaned from factors that will prevent adhesion such as oil, dirt and paint. Before plastering, the surface should be saturated with water depending on the temperature of the air.

Product Preparation and Application:

Pour 10 kg of liquid component into a clean container, slowly pour 25 kg of powder component into it and mix for about 5 minutes with the help of a low speed mixer (400-600 rpm) until a homogeneous mixture is obtained. After the mixing process is finished, it is left to rest for 5 minutes. At the end of 5 minutes, a pre-mixing is done again and the application is started with the help of a brush or trowel.
After the first setting of the material, the 2nd coat is applied in the vertical direction of the 1st coat application. If desired, carrier fiber or mesh can be used as reinforcement between coats.

In 25 kg kraft bags and 10 lt drums