• Suitable for indoor and outdoor use.
• It does not shrink or crack.
• Suitable for horizontal and vertical applications.
• Because it does not contain corrosive or toxic substances, it can be used in water tanks.

• In kitchens and bathrooms,
• For waterproofing sun-exposed areas such as terraces and roofs,
• For vertical and horizontal applications, both indoors and outdoors.

• Surface Preparation:
  The surface to be plastered must be free of oil, dirt, paint, and other factors that would prevent adhesion. Before plastering, the surface should be saturated with water, depending on the air temperature.
• Product Preparation and Application:
  Pour 10 kg of liquid component into a clean container. Slowly add 20 kg of powder component and mix with a low-speed mixer (400-600 rpm) for approximately 5 minutes until a homogeneous mixture is obtained. After mixing, let it rest for 5 minutes. After 5 minutes, perform another pre-mixing and proceed with application using a brush or trowel. After the material has set initially, apply the second coat perpendicular to the first coat application. If desired, carrier fiber or mesh reinforcement can be used between the coats.

It is available in 20 kg kraft bags and 8 liter containers.